JDSU NT850 Guia do Utilizador descarregar pdf (Página 43)

Chapter 3 Performing Network Tests

Performing Ping Tests

LanScaperPRO Network Tester User’s Guide 27

c Scroll through the available targets using the

arrow keys. Note that while you are scrolling, the

IP address of the target currently visible in the Tg

field appears in the target IP address field to the

right of the Tg field.

d When the desired target is displayed in the Tg

field, press ACCPT to select it. There are four

target numbers available (Tg1-Tg4), plus a Tg-

option that will leave the target disabled.

8 (Optional) Modify the IP address for the selected

target by doing the following:

a Highlight the IP address for the target selected

(to the right of the Tg field) using the arrow keys.

b Press the SEL key.

The Edit Target IP screen appears.

Figure 9 The Edit Target IP screen

c Modify the IP address by using the left and right

arrow keys to select the digit to be changed and

the up and down arrow keys to change the value

of the selected digit. Note that the IP address

appears in typical decimal dot format. Each of

LanScaperPRO_User_Guide.book Page 27 Friday, January 25, 2008 1:14 PM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 105 106

Sem comentários

JDSU NT850 Guia do Utilizador Página 43