JDSU NT850 Guia do Utilizador descarregar pdf (Página 39)

Chapter 3 Performing Network Tests

Performing Port Discovery Tests

LanScaperPRO Network Tester User’s Guide 23

Performing Port Discovery Tests

The Port Discovery test identifies what type of Ethernet

equipment, if any, is connected to the other end of the jack

or cable being tested.

To perform a Port Discovery test

1 Connect the LanScaperPRO to the unknown jack or

cable to be tested. Connect to jacks via a patch cord;

for cables, plug the cable directly into the tester.

2 Access the Network Test Menu. (See “Accessing the

Network Test Menu” on page 22.)

3 Scroll through the menu options using the arrow keys

until Port Discovery is highlighted.

4 Press the SEL key.

The Port Discovery screen appears.

Figure 7 The Port Discovery screen

5 Press the TEST key to begin the test.

LanScaperPRO_User_Guide.book Page 23 Friday, January 25, 2008 1:14 PM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 105 106

Sem comentários

JDSU NT850 Guia do Utilizador Página 39